Chicken feed line is an automatic feeding equipment, feed quantity can be controlled more accurately, save costs and improve the economic benefits of farmers.
Chicken feed line main accessories:
Chicken feed line is mainly composed of driving device, hopper, feed pipe, skein, feed tray, suspension lifting device, anti-perch device and feed level sensor. Its main function is to transfer the material in the hopper to each material tray to ensure the consumption of broilers, and by the material level sensor to automatically control the motor transmission opening and closing, to achieve the purpose of automatic feeding.
Introduction of chicken feed line:
Chicken feed line is a kind of automatic chicken feeding equipment, mainly suitable for chickens, commercial chickens, finished chickens feeding. It has the characteristics of high degree of automation, accurate feeding control and so on. It is mainly composed of tower, tray, feed pipe, winch, motor and material level sensor. The tray on each feeding line is generally divided into 16 grates, which can supply 50-70 chickens with normal diet and even feeding. It can effectively reduce the work intensity of chicken raising staff, save breeding cost, save time and effort.
Hot-selling automatic chicken feeding pan system for Breeder Hens
|
Product Name
|
Chicken feeding pan system for Breeder Hens
|
|
Material
|
pp
|
|
Pan distance
|
3-4 pans/3m
|
|
Space between two grills
|
75-100mm
|
|
Transmission speed
|
450kg/h
|
|
Usage
|
Floor Breeder Hens Feeding
|
|
Feature
|
Save Breeding Cost
|
The main characteristics of the hen plate
4 disks /3m, that is, the disk distance is 750mm;
Plate diameter: 360mm;
Material: polypropylene;
Breeding quantity: average 12.5 / plate;
16 feeding bit width 40-52mm divided into 11 grades, suitable for different breeds and age of feeding requirements;
The feeding hole height is divided into 70mm, 80mm and 90mm. When the feeding hole width is 52mm and the height is 90mm, the chicks can enter and exit freely;
The feeding hole height is 70mm, to ensure that the feed does not spill, save feed;
Tray capacity: divided into 16 levels, 300-800g/plate, can meet the needs of different stages of chicken feeding;
The design has a switch plate, can switch each tray;
The bottom of the plate is suspended, easy to disassemble. It does not need to be removed when washing, and it is convenient and hygienic when installing again.
Automatical Chicken Feeding System Line
1 Feed Line Hopper:
2 Hopper Level Control
3 Unloader Kits
4 Feed Line Tube
5 Chicken Feed Pans
6 Feed Line Hanger
7 Grow Auger
8 intermediate Control Pan
9 Feed Line Clamp
10 Tube Fix Clip
11 End Control Pan
12 Drive Units
Automatic chicken feeder system are widely used in broilers, layers, ducks, gooses etc Main automatic chicken feedersystemis a complete set of automatic feeding system, including a material conveying pipe,silo, auger, drive motor and amateriallevel sensor. Main Feed line is mainly used to deliver feed from silo to the hopper in the feeding pan system Thereis one feed sensor at the end of main feed line, which can control the drive motor on and off to realize automatically feeding.
Precautions for checking and debugging:
1, check whether all the material pipe is on the same level, otherwise adjust the suspension ring to make the material line in a straight state, the flatness of the material line has a great impact on the performance.
2, check whether the motor, sensor wiring is correct, wiring is firm.
3. Start the material line running for a short period of time, check the possible installation errors, pay attention to observe whether the feeding direction of the skein is correct. Touch the material level sensor by hand to check whether the sensor works properly.
4. Let the skein run for about 15-20 minutes without material to remove the burrs stuck on the skein and tube wall. In this process, the noise may be a little loud, which is normal. If it is with the chicken installation, then use the point mode, so that the chicken gradually adapt to the sound of the material line.
5, remove all burrs and dirty things in the material tube, and check the heating on the tube (mainly in the material box spindle position, if the heating needs to pull out the spindle for grinding), remove all debris in the material tray.
6. Add a small amount of feed into the feed box until the tray is filled.
7. Continue feeding as above until all trays of the entire feed line are filled with feed.
Maintenance matters needing attention:
1. Check the flatness of the material line regularly and check whether the screws and nuts are loose.
2. Check the sealing condition of the electric cabinet regularly, wipe the outside of the control cabinet with a dry rag to keep the control cabinet clean. Check whether the internal wiring of the control cabinet is secure regularly.
3. The motor is well protected with textile bags or feed buckets to prevent water from the motor or chickens from pulling feces on the motor.
4. When washing, the material line will be raised to the height, open the bayonet between the material tray and the grid, so that the material tray is hung on the transfer pin of the grid and washed with high pressure water gun. When washing, the motor must be wrapped with waterproof plastic to prevent water in the junction box.
5. Empty the feed in the spring feed system as soon as the coop is emptied before the system is cleaned.
Each batch of chickens should be lubricating to the lifting winch once, special attention: do not inject lubricating oil into the friction sheet.
Our Advantage
Company Profile
Qingdao Luhui Machinery Co., Ltd. is located in Qingdao, a port city in Shandong Province, China. Our factory is 40 kilometers away from Qingdao port and 30 kilometers away from Qingdao Jiaozhou International Airport.The company is a professional equipment manufacturer for poultry breeding. It has been committed to the research and development and upgrading of livestock and poultry drinking water, feeding, ventilation and other systems for the past ten years. It has an independent research and development, production and sales team. The accuracy, stability and reliability of the products are in the leading position in China.
Our main market includes Africa. Middle East. South America and Europe. We exported to more than 20 countries and we have cooperated with many well-known companies and suppliers, Welcome customers and friends to communicate with us.
Main Facilities
Packing and Shipping
FAQ
Q1: My chicken house hasn't been built, can you give us some advice?
A1: OK. Please proceed building as your plan.
If you have enough ground , we can advice house dimension according to your preference.
Q2.Sample available?
A2:Yes. but the client pay for the freight fee.
Q3: This is my first time for importing, can you ship the goods to my address ?
A3: No problem. We can send our products to the place you want.
Q4.How long is the life of your products?
A4: More than 10 Years.
Q5: I am interested in your poultry equipment. What is the best price of each unit ?
A5: Please try to inform us the basic information as below for our reference, so that we recommend the suitable option and quote the exact price to you accordingly:
a) What is the dimension L*W*H of your chicken house? Price has direct relationship with the dimension, because some parts are quoted by length, some by lines.
b) How many birds will you keep?
c) Will you feed broiler or layer?
Q6: I worry about the installation of poultry equipment, can you help me ?
A6: Yes, we can.
We will send brochure and video for your reference for free.
We can even dispatch our engineers to assist you in construction and installation, in which case you will need to bear the corresponding costs.
Audited Supplier 
){kind=link}
){kind=link}