Automatic Duck feeding system:
1. Pan Feeding System: Ideal way for whole raising period from brooding to slaughter.
2. Nipple Drinking system: Effective way to supply chicken water and keep the waste dry.
3. Fans and cooling pads system: Keep the poultry house air cool and fresh.
4. Environmental control system: Automatically control the temperature, humidity, light, etc.
5. Fogging system: Regularly disinfecte the poultry house.
6. Heating system: Fuel can be gas or oil. Keep the house warm during winter.
Duck Feed Pan:
| Product Name |
Automatic chicken /ducks feeder drinker poultry pan system |
| Pan diameter |
430mm |
| height |
50-100mm |
| Pan grill qty |
5 grills |
| Feed capacity |
30-40 birds/ pan |
| Pan use |
starting from 1-day age |
| Bottom shape |
flat shape |
| Material |
100% PP ,With anti- UV additive |
| Feed pipe dimension |
45mm*1.2mm |
| Capacity |
450Kg/h |
| Feed motor power |
0.75KW, 220v/380v/415v |
Automatical Chicken Feeding System Line
1 Feed Line Hopper:
2 Hopper Level Control
3 Unloader Kits
4 Feed Line Tube
5 Chicken Feed Pans
6 Feed Line Hanger
7 Grow Auger
8 intermediate Control Pan
9 Feed Line Clamp
10 Tube Fix Clip
11 End Control Pan
12 Drive Units
Automatic chicken feeder system are widely used in broilers, layers, ducks, gooses etc Main automatic chicken feedersystemis a complete set of automatic feeding system, including a material conveying pipe,silo, auger, drive motor and amateriallevel sensor. Main Feed line is mainly used to deliver feed from silo to the hopper in the feeding pan system Thereis one feed sensor at the end of main feed line, which can control the drive motor on and off to realize automatically feeding.
Precautions for checking and debugging:
1, check whether all the material pipe is on the same level, otherwise adjust the suspension ring to make the material line in a straight state, the flatness of the material line has a great impact on the performance.
2, check whether the motor, sensor wiring is correct, wiring is firm.
3. Start the material line running for a short period of time, check the possible installation errors, pay attention to observe whether the feeding direction of the skein is correct. Touch the material level sensor by hand to check whether the sensor works properly.
4. Let the skein run for about 15-20 minutes without material to remove the burrs stuck on the skein and tube wall. In this process, the noise may be a little loud, which is normal. If it is with the chicken installation, then use the point mode, so that the chicken gradually adapt to the sound of the material line.
5, remove all burrs and dirty things in the material tube, and check the heating on the tube (mainly in the material box spindle position, if the heating needs to pull out the spindle for grinding), remove all debris in the material tray.
6. Add a small amount of feed into the feed box until the tray is filled.
7. Continue feeding as above until all trays of the entire feed line are filled with feed.
Maintenance matters needing attention:
1. Check the flatness of the material line regularly and check whether the screws and nuts are loose.
2. Check the sealing condition of the electric cabinet regularly, wipe the outside of the control cabinet with a dry rag to keep the control cabinet clean. Check whether the internal wiring of the control cabinet is secure regularly.
3. The motor is well protected with textile bags or feed buckets to prevent water from the motor or chickens from pulling feces on the motor.
4. When washing, the material line will be raised to the height, open the bayonet between the material tray and the grid, so that the material tray is hung on the transfer pin of the grid and washed with high pressure water gun. When washing, the motor must be wrapped with waterproof plastic to prevent water in the junction box.
5. Empty the feed in the spring feed system as soon as the coop is emptied before the system is cleaned.
Each batch of chickens should be lubricating to the lifting winch once, special attention: do not inject lubricating oil into the friction sheet.
Our Advantage
Company Profile
Qingdao Luhui Machinery Co., Ltd. is located in Qingdao, a port city in Shandong Province, China. Our factory is 40 kilometers away from Qingdao port and 30 kilometers away from Qingdao Jiaozhou International Airport.The company is a professional equipment manufacturer for poultry breeding. It has been committed to the research and development and upgrading of livestock and poultry drinking water, feeding, ventilation and other systems for the past ten years. It has an independent research and development, production and sales team. The accuracy, stability and reliability of the products are in the leading position in China.
Our main market includes Africa. Middle East. South America and Europe. We exported to more than 20 countries and we have cooperated with many well-known companies and suppliers, Welcome customers and friends to communicate with us.
Main Facilities
Packing and Shipping
FAQ
Q1: My chicken house hasn't been built, can you give us some advice?
A1: OK. Please proceed building as your plan.
If you have enough ground , we can advice house dimension according to your preference.
Q2.Sample available?
A2:Yes. but the client pay for the freight fee.
Q3: This is my first time for importing, can you ship the goods to my address ?
A3: No problem. We can send our products to the place you want.
Q4.How long is the life of your products?
A4: More than 10 Years.
Q5: I am interested in your poultry equipment. What is the best price of each unit ?
A5: Please try to inform us the basic information as below for our reference, so that we recommend the suitable option and quote the exact price to you accordingly:
a) What is the dimension L*W*H of your chicken house? Price has direct relationship with the dimension, because some parts are quoted by length, some by lines.
b) How many birds will you keep?
c) Will you feed broiler or layer?
Q6: I worry about the installation of poultry equipment, can you help me ?
A6: Yes, we can.
We will send brochure and video for your reference for free.
We can even dispatch our engineers to assist you in construction and installation, in which case you will need to bear the corresponding costs.
Audited Supplier 
){kind=link}
){kind=link}